Material : Tantalum strip, tantalum sheet, tantalum ribbon, tantalum foil, Ta strip in coil(cold rolled) for deep drawing application.
Temper Condition: annealed
Purity   : 99.9%min conformity with ASTM B708 98 UNS R05400
Chemical composition : 
            O           0.0300 %max
            C           0.0100 %max
            N           0.0100 %max
            H           0.0015 %max
            Fe         0.0100%max
            Ni          0.0100%max
            Si          0.0050 %max
            Mo         0.0200 %max
            W          0.0500 %max
            Nb         0.1000 %max
            Ta         Remainder (typically 99.96%)
Physical & Mechanical property :
            Tensile strength      207 MPa min. or 30 KSI.
            Yield strength         138 MPa min. or 20 KSI.
            Elongation              20%min. 
Size available:      
             Thickness 0.05 up to 0.09mm x Width up to 110mm max. 
             in one continuous coil with three EB welding parts 
             which will be marked or not at buyer's option.  
                  
            Thickness 0.1 up to 0.9mm x Width up to 350mm max. 
            in one continuous coil with three EB welding parts 
            which will be marked or not at buyer's option. 
            e.g. 1 coil=25kgs approx. for 0.18x67xLength.
Grain size:       from ASTM7 to ASTM14 (typical ASTM9.6).
Hardness:        120 VHN-90
Recrystallization: 100%
Special requirements :
                      To Be wound in a 300mm ID stainless steel centre spools.
                      To be free from crown and wavy edges.
Application :     used as tantalum diaphragm in the gaskets (tantalum gasket) traditionally, 
                     meanwhile it is usually to be deep-drawn into tantalum up of tantalum capacitors.

Thickness                  Width         Length 
0.05mm                 7.52 mm      R/L
0.0508mm(.002")    9.53 mm       R/L
0.08 mm               11.89 mm      R/L
0.127mm (.005")    12.45 mm      R/L
0.10 mm               15.88 mm      R/L
0.127mm (.005")    21.03mm       R/L
0.0635mm             21.59mm       R/L
0.10 mm               24.00 mm      R/L
0.13 mm               25.40 mm      R/L
0.508mm (.020")    28.58 mm      R/L
0.127mm               26.97 mm     R/L
0.2667mm (.0105") 29.97 mm      R/L

0.177mm               42mm          R/L
0.2667mm(.0105")  31.75 mm      R/L
0.254mm (.010")    33.02 mm      R/L
0.165mm              34.85 mm      R/L
0.185mm              36.58 mm      R/L
0.20 mm               38.89 mm      R/L
0.254mm              42.06 mm      R/L
0.025mm              43.00 mm      R/L
0.508mm (.020")    43.69 mm      R/L
0.10 mm               44.45 mm      R/L
0.15 mm               44.57 mm      R/L
0.15 mm               45.21 mm      R/L
0.20 mm               48.00 mm      R/L

0.254mm               50.00 mm      R/L
0.20 mm                52.37 mm     R/L
0.18 mm                53.70 mm     R/L
0.18 mm                54.40 mm     R/L
0.15 mm                55.37 mm     R/L 
0.20 mm                55.62 mm     R/L
0.16 mm                57.15 mm     R/L 

0.15 mm                60.00 mm     R/L 
0.18 mm                60.30 mm     R/L 
0.15 mm                61.21 mm     R/L
0.18 mm                63.00 mm     R/L 
0.2667mm (.0105")  63.50 mm     R/L 
0.15 mm                64.70 mm     R/L
0.2667mm (.0105")  65.07 mm     R/L
0.18 mm                66.00 mm     R/L
0.15 mm                66.40 mm     R/L
0.20 mm                67.00 mm     R/L
0.18 mm                67.46 mm     R/L
0.18 mm                68.00 mm     R/L
0.254mm               69.85 mm     R/L

0.381mm (.015")     70.64 mm     R/L
0.25 mm                74.60 mm     R/L 
0.889mm (.035")    75.00 mm      R/L
0.36 mm                75.50 mm     R/L
0.254mm               76.00 mm      R/L
0.0508mm(.002")    76.20mm(3")  R/L
0.20 mm                76.25 mm     R/L
0.18 mm                79.40 mm     R/L

0.635 mm               80.00 mm     R/L 
0.508 mm               82.00 mm     R/L
0.10 mm                82.55 mm      R/L
0.15 mm                85.00 mm      R/L
0.635 mm              92.00 mm      R/L 
0.762 mm (.030")   94.00 mm       R/L

0.80 mm                 100 mm       R/L 
1.27 mm                 101 mm       R/L
0.15 mm                 101.6 mm    R/L
0.18 mm                 108.2 mm    R/L 
0.10 mm                 120 mm       R/L 
0.25 mm                 123.2 mm    R/L
0.20 mm                 130 mm       R/L
1.27 mm                 152.4 mm    R/L
Note : R/L means Random Length in one continuous coil with two or three EB welding 
parts which will be marked or not at buyer's option, 1 coil=25kgs approx;