Tantaloy Inlet Spring is made of tantaloy "61" metal wire, NRC91(92.5%/7.5% Ta/W) tantalloy wire, which can provide a lifetime warranteed main regulating spring in the vacuum regulator, tantallum alloy inlet valve springs and ejector spring in chlorine control valve of gas chlorinator for the water and wastewater treatment industry. its combination of mechanical and anti-corrosion properties has led to extensive use for chlorinator valve springs, tantalloy springs (inlet) can resist mixed acids such as, Nitric Acid, Sodium Hydroxide, Hydrochloric Acid, etc,. It has more endurance than that of hastelloy C-276 springs. It is also used for chemical process equipment including heating and cooling coils, heat exchangers, condensers, reaction vessels, leaf springs and bellows.
| Material : |
|
|
|
| Wire Diameter: |
|
|
| Outside Diameter: |
|
|
| Mean Diameter: |
|
|
| Inside Diameter: |
|
|
| Free Length: |
|
|
| Effective No. Coils or Active Turns : |
|
| Total No. Coils or Full Turns: |
|
| Working Length: |
|
|
| Working force: |
|
|
| Modulus of Torsion: |
|
|
| Ends square and ground |
|
|
on request or according to the customer's drawings or blueprint for tantaloy inlet spring, tantaloy relief spring, tantaloy ejector spring, tantaloy compression spring, tantaloy check valve spring, etc., all kind of springs, these NRC91 tantalloy springs can fully meet the requirements of gas chlorinators for the water and wastewater (the chlorination for the disinfection of water & wastewater) treatment industry.
We can supply you with the most competitive prices on all tantalloy springs or tantaloy springs used as the spare parts and replacement parts on the gas chlorination equipment.
