Home
Products
Ta(Tantalum)
Nb(Niobium)
RE(Rare Earth) Ferrocerium+Mischmetal
Applications
Typical Specs
Downloads
Contact Us

Products 

 

Tantalum carbide powder (TaC)

  • Tantalum carbide powder (TaC)
  • Tantalum carbide powder (TaC)
Model No.︰TAC9900
Share on:

 Total 47 Related Items 
Prev4344454647Next

Product Description

Chemical composition: 

Elements TaC TaC : NbC TaC : NbC TaC : NbC TaC : NbC TaC : NbC TaC : NbC TaC : NbC NbC
  100 90 : 10(9:1) 80 : 20(8:2)     75 : 25 70 : 30(7:3) 60 : 40(6:4) 50 : 50(5:5)     2 : 1 100
  % % % % % % % % %
Ta Balance 83.2- 85.2 73.8- 75.8 69.4 - 71.4 64.8- 66.6 55.1- 57.1 45.8- 47.8 58.3- 58.7 1.00 max
Nb 0.250 max 8.20- 9.60 16.7- 18.7 21.0 - 23.0 25.7- 27.5 34.4- 36.4 43.3- 45.3 25.8- 26.0 Balance
Carbon Total 6.10 - 6.30 6.5 - 6.90 7.00- 7.40 7.35 - 7.65 7.50- 7.90 8.00- 8.40 8.50- 8.90 7.70- 8.10 11.0- 11.4
  or Carbon Total is included in the following ratio : 
TaC 99.5   min 89.7- 92.1 80.8- 83.2 76.75 - 79.05 72.3- 74.5 63.1- 65.5 54.3- 56.7 66.2- 66.6 1.00 max
NbC 0.250 max 14.7- 16.5 23.7- 26.1 28.35 - 30.65 33.2- 35.4 42.4- 44.8 51.8- 54.2 33.5- 33.9 99.00 min
Carbon Total included included included included included included included included included
Carbon Free 0.150 max 0.150 max 0.150 max 0.150 max 0.150 max 0.150 max 0.150 max 0.150 max 0.150 max
Al 0.010 max 0.010 max 0.020 max
Ca 0.020 max 0.010 max 0.020 max
Fe 0.100 max 0.100 max 0.150 max
K 0.002 max 0.002 max        /
N 0.050 max 0.050 max 0.050 max
Na 0.002 max 0.002 max        /
O* 0.250 max 0.250 max 0.250 max
S 0.010 max 0.010 max 0.010 max
Si 0.010 max 0.010 max 0.010 max
Ti 0.010 max 0.010 max 0.010 max
W 0.010 max 0.010 max 0.010 max
FSSS Size Fine size      0.8 - 1.0 micron  O    0.35%Max    
  Standard size    1.0 - 2.0 micron  O    0.25%Max    
  coarse size      2.0 - 3.0 micron  O    0.20%Max    

Appearance:  In powder with yellow-brown color.       
Application  : Tantalum Carbide (TaC) and Niobium Tantalum Carbide (NbTaC) are used as additives mainly for P-type cutting tools and cermets because of the beneficial effect on hot hardness and toughness. Therefore these products are homogeneous mixed crystals with
high purity and narrow particle size distribution.  Tantalum Carbide (TaC) and Tantalum Niobium Carbide (TaNbC) are usually used as an additive to *WC-Co ready-to-press (Tungsten-Carbide-Cobalt RTP) grade powders in order to enhance the physical properties of the sintered structure of hardmetals and alloys. TaC and TaNbC are frequently used in steel cutting grade powder attritions to maintain structure edge strength at high temperatures.  In addition, TaC can be used as a grain growth inhibitor preventing the formation of large grains and increasing the hardness of the sintered part.    
(* Tungsten Carbide powder (WC or WCP) is produced by carburization in a hydrogen atmosphere with a mixture of tungsten metal powder and pure black carbon, which is used to manufacture Cemented Tungsten Carbide - Cutting Tools, Wear Parts, Roll & Die, Diamond Tools, Mining Tools etc.)    

Tantalum carbide is made by carburizing either pure tantalum powders or tantalum pentoxide (Ta2O5). The four most important hard carbides for the production of cobalt-cemented (hard metal) carbide compositions are tungsten carbide (WC or WCP), and the cubic carbides titanium carbide (TiC), tantalum carbide (TaC), and niobium carbide (NbC). Of these, tungsten carbide is of paramount importance, in most cases forming a foundation-alloy to which smaller quantities of the cubic carbides are added to affect changes in metalcutting insert and other tool properties. In cemented carbide compositions for machining applications, preformed binary and ternary solid solutions (mixed crystals), made up of the primary carbides and based on the solven powers of the cubic carbides for WC, comprise important portions of the hard phases in cutting-insert microstructures. WC–TiC and WC–TiC–TaC(NbC) are of great importance among carbide solid solutions. WC, essentially unalloyed, is the paramount hard phase in metal-cutting tools for short-chipping materials, forming tools, and in tools used by the mineral, transportation, and construction industries. Auxiliary hard carbides of chromium, molybdenum, vanadium, hafnium, and zirconium are used to achieve secondary property enhancement. In general, the hard carbides are produced by reaction of elementary carbon or hydrocarbons and metals and metal compounds at high temperatures. Methods include carburization by thermal diffusion, by menstruum process, by thermochemical reaction, by reduction of metal halides and, to a minor extent, by fusion.

Typical size: 0.7 micron, 0.8 micron, 1.0-1.3 micron, 1.2 micron max. , 1.5 micron max.

Trade name: Tantalum carbide, tantal carbide, tac, tant carbide, ta carbide, cemented carbide powder, cemented carbide additive, hard alloy additive, tantalum alloy additive, tungsten carbide powder+cobalt powder+niobium carbide powder+tantalum carbide powder ready-to-press powder, etc.,

Product Image



Related Products
Tantalum Marker Bands implant device grade
Tantalum Marker Bands implant device grade
Tantalum rod Tantalum bar Tantalum electrode
Tantalum rod Tantalum bar Tantalum electrode
Tantalum wire per ASTM F 560 Surgical Implant Applications
Tantalum wire per ASTM F 560 Surgical Implant Applications
tantalum pin tantalum marker radiographic marker for medical devices
tantalum pin tantalum marker radiographic marker for medical devices

Home  |  Products  |  Applications  |  Typical Specs  |  Downloads  |  Contact Us  |  Sitemap  |  Mobile Version
  English     繁體版     简体版